Effects of environmental factors on corrosion behavior of aluminum

Aluminum, used as a material for heat exchangers in air conditioners, often has problems of leakage of refrigerant on the Al surface due to corrosion. The problems originate from pitting corrosion of the Al in an external environment. To understand corrosion problems, it is necessary to study the corrosion behavior of Al in various environments. In this study, the effects of environmental factors on the corrosion behavior of Al were studied by the surface analysis and electrochemical testing in 3.5 wt% NaCl solutions, with changes of dissolved oxygen, temperature, and concentration of Cl⁻ and S ions. Among the external environmental factors, the presence of oxygen and the increase of Cl⁻ ion concentration do not significantly affect the corrosion potential of Al, leading to an increase of only 1.1 and 6 times, respectively. There was a significant decrease in the corrosion resistance of Al, approximately 40 and 800 times, respectively, with the increase of concentration of S and temperature.     

Korean automatic spacing using pretrained transformer encoder and analysis

Automatic spacing in Korean is used to correct spacing units in a given input sentence. The demand for automatic spacing has been increasing owing to frequent incorrect spacing in recent media, such as the Internet and mobile networks. Therefore, herein, we propose a transformer encoder that reads a sentence bidirectionally and can be pretrained using an out-of-task corpus. Notably, our model exhibited the highest character accuracy (98.42%) among the existing automatic spacing models for Korean. We experimentally validated the effectiveness of bidirectional encoding and pretraining for automatic spacing in Korean. Moreover, we conclude that pretraining is more important than fine-tuning and data size.     

Nanoraspberry-like palladium/spongy nickel oxide for electrooxidation of five light fuels

The spongy nickel oxide (SNO) was synthesized the solution combustion method. The SNO was selected as a promoter to boost the catalytic activity of nanoraspberry-like palladium (NRPd) toward electrooxidation of five light fuels (LFs): methanol, ethanol, formaldehyde, formic acid, and ethylene glycol. The X-ray powder diffraction, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy, and field emission scanning electron microscope techniques were used for the materials characterization. In comparison with nonpromoted Pd, the NRPd-SNO electrocatalyst shown an excellent efficiency in parameters like the electrochemical active surface area and anti-CO poisoning behavior. The turnover data and the parameters, including reaction order, activation energy, and the coefficients of electron transfer and diffusion, were evaluated for the each process of LFs electrooxidation. The outcome for NRPd-SNO activity toward LFs electrooxidation was compared to some reported electrodes. The SNO increases the removal of intermediates created in the oxidation of LFs that can poison the surface of palladium catalyst. This is due to the presence of the lattice oxygens in SNO structure and Ni switching between its high and low valances. The compatibility of the adsorption process of LFs on the surface of the NRPd-SNO catalyst with different isotherms was determined by studying the Tafel polarization and calculating the surface coverage.     

表面离子印迹聚合物金属离子吸附材料研究进展

离子印迹聚合物吸附材料对模板离子具有强识别能力，对其可实现高选择吸附，因而离子印迹技术常用于制备高选择性吸附材料。但传统方法制备的离子印迹吸附材料，因识别位点容易被包埋导致其吸附容量小、吸附-脱附速率低，而表面离子印迹技术则是采用模板离子和聚合单体直接在载体表面或附近区域构筑选择性识别位点，所有活性位点均暴露，从而有效地解决了上述问题。本文从技术原理与合成原料、制备工艺方法以及载体材料类型等方面对表面印迹聚合物吸附材料近期研究进展情况进行了概述。针对相关研究现状，从载体材料、功能单体、目标离子等角度分析和讨论了表面离子印迹聚合物吸附材料当前发展中的不足及其所面临的挑战，并对表面离子印迹技术发展趋势和前景进行了展望。     

咖啡渣活性炭的制备、表征及其对Cr(Ⅵ)的吸附机制研究

以碘吸附值为评价指标，活化时间、活化温度和浸渍比为影响因素，采用响应面法试验设计对磷酸活化法制备咖啡渣活性炭的工艺条件进行优化，并通过静态吸附试验研究了不同吸附时间、溶液pH值和吸附温度条件下，活性炭对水溶液中Cr（Ⅵ）吸附性能的影响，最后利用Langmuir、Freundlich吸附等温方程、准一级动力学方程、准二级动力学方程和颗粒内部扩散方程进行拟合。试验结果表明，制备咖啡渣活性炭的最佳工艺条件为活化时间1 h、活化温度498℃、浸渍比1.72；在此条件下活性炭得率为30.4%，碘吸附值为（799±16）mg/g，比表面积为1 006 m²/g，孔容为0.779 cm³/g、微孔孔容为0.051 cm³/g、平均孔径为3.088 nm。较低pH值和较高温度能够促进活性炭对Cr（Ⅵ）的吸附；Langmuir等温方程能够更好地描述活性炭对Cr（Ⅵ）的吸附效果；活性炭对Cr（Ⅵ）的吸附分3个阶段：快速吸附阶段、慢速吸附阶段和吸附平衡阶段，10 min内可完成吸附总量的79%，360 min内达到吸附平衡，该吸附过程符合准二级吸附动力学方程。分析表明咖啡渣活性炭对Cr（Ⅵ）的吸附主要为单分子层的化学吸附。     

槽式太阳能集热管内相变微胶囊悬浮液的热力性能分析

针对传统使用水基和油基的太阳能集热器换热效果低和管壁热应力大的问题，以相变微胶囊悬浮液为工作流体，对抛物型槽式太阳能集热器进行了三维建模。采用蒙特卡罗射线追踪法结合有限容积法和有限元法的方法求解了太阳能集热管的光?热?力耦合问题，采用欧拉?欧拉多相流模型研究了相变微胶囊悬浮液在集热管内的流动换热特性。结果表明，相变微胶囊悬浮液强化了集热管内的对流换热，不仅降低了集热管的沿程壁温，且减少了集热管的周向温差，均化了集热管温度分布。集热管周向等效热应力呈花瓣型分布，对应的5个高温度梯度的位置附近(圆周角θ=5°, 90°, 175°, 225°和315°)出现等效应力局部峰值。吸热管内壁面θ=90°处轴向热应力为压应力，作用于整个管程，而径向热应力和切向热应力为拉应力，主要作用在进出口端。相变微胶囊悬浮液浓度越高，强化换热效果越好，集热管热应力越小，但产生的压降也随之增大。     

表面印迹耦合溶胶-凝胶法制备4-硝基酚印迹材料及性能表征

采用表面印迹和溶胶?凝胶相结合的方法，以4-硝基酚(4-NP)为模板分子、α-甲基丙烯酸(α-MAA)为功能单体、三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂、偶氮二异丁腈(AIBN)为引发剂，制备可选择性识别吸附去除水中4-NP污染物的印迹吸附材料，考察了4-NP与α-MAA和4-NP与TRIM摩尔比、致孔剂种类、提取液种类对所制材料吸附性能的影响，并通过正交实验优化材料制备条件，用扫描电子显微镜、傅立叶红外光谱仪、比表面积分析仪、热重?差热分析仪和纳米粒度仪等设备对最优条件下合成的材料进行了表征。结果表明，4-NP:α-MAA摩尔比为1:8，4-NP:TRIM摩尔比为1:10，致孔剂为乙醇，提取液为甲醇/乙酸(7:3，体积比)时所制印迹材料对4-NP的去除效果最佳，达6.23 μmol/g；4-NP成功印记在硅胶表面，印迹材料能特异性吸附4-NP。     

纳米Co/rGO磁性复合吸附材料的制备及对Cu2+的吸附性能

以改进Hummer法制备的薄片状氧化石墨烯(GO)为载体和模板负载钴离子，然后采用原位还原法制得纳米金属Co/石墨烯磁性复合吸附材料(Co/rGO)，并将其应用于对Cu2+的吸附和脱除，以期为高效可复用的铜离子脱除剂的合成与应用提供指导。实验结果证实，Co/rGO复合材料具有超顺磁性，能够很方便的使用磁铁进行分离并在无磁场情况下振荡分散。Co/rGO复合材料对Cu2+具有稳定的吸附/脱附性能，实验条件下对Cu2+的最大吸附容量达到117.5 mg/g且5 min内实现吸附平衡，远优于其原料GO的60 min吸附容量27.6 mg/g。本工作系统考察了NaOH加入量、络合剂种类、溶剂种类等关键因素对Co粒子在rGO载体上形貌和分布特性的影响，比较了不同合成条件下的复合材料对Cu2+吸附效果的影响，并对优选条件下制备的Co/rGO复合材料进行了FT-IR, XRD, SEM表征。研究结果表明，纳米Co/rGO磁性材料对Cu2+的吸附过程更符合Freundlich模型，属于多层吸附。室温下吸附焓ΔH=17.81 kJ/mol，吸附反应平衡常数Kθ=3.65。当初始Cu2+浓度为39.22 mg/L时，对Cu2+的吸附率为93.47%，五次吸附/脱附循环后吸附容量仍保持在初始值的94%，每次吸附后溶液中残余Cu2+浓度均满足钴电解液对杂质铜离子的浓度去除要求(5 mg/L)或GB 8978-1996污水综合排放标准3级(2 mg/L)，有望在相关领域发挥作用。     

载铜树脂处理高含盐氨氮废水的性能

针对高含盐氨氮废水，选择具有不同功能基团的树脂为载体，进行负载Cu2+改性制得载铜树脂并对其处理高含盐氨氮废水的性能进行研究。在筛选出最佳载铜树脂的基础上，研究pH及Na+浓度、树脂投加量、反应时间对载铜树脂处理高含盐氨氮废水效果的影响，通过对吸附氨氮前后的载铜树脂进行SEM和EDS表征分析并构建吸附动力学模型以进一步探究配位吸附的过程。结果表明，Cu2+可与螯合树脂D751稳定结合且在宽pH值下均表现出耐盐性和良好的氨氮吸附效果；在室温(25℃)、pH=11及Na+浓度4 g/L、树脂投加量8 g/L、反应时间60 min的条件下，D751载铜树脂对氨氮的去除率为34.8%。D751载铜树脂吸附氨氮后其表面出现明显的晶状结构物质，该物质可能为铜氨络合物。D751载铜树脂对高含盐氨氮的吸附符合准二级动力学模型。     

Catalytic oxidative desulfurization of gasoline using phosphotungstic acid supported on MWW zeolite

Catalysts for the desulfurization of gasoline samples were synthesized via the immobilization of well-dispersed phosphotungstic acid (HPW) on Mobil composition of matter-twenty-two (MWW) zeolite. Characterization results indicated that these catalysts possess a mesoporous structure with the retention of the Keggin structure of immobilized HPW. Relevant reaction parameters influencing sulfur removal were systematically investigated, including HPW loading, catalyst dosage, temperature, initial S-concentration, molar ratio of oxidant to sulfide (O/S), volume ratio of MeCN to model oil (Ext./oil), and sulfide species. The 40 wt-% HPW/MWW catalyst exhibited the highest catalytic activity with 99.6% dibenzothiophene sulfur removal from prepared samples. The 40 wt-% HPW/MWW catalyst was recycled four times and could be easily regenerated. Finally, as an exploratory study, straight-run-gasoline and fluid catalytic cracking gasoline were employed to accurately evaluate the desulfurization performance of 40 wt-% HPW/MWW. Our research provides new insights into the development and application of catalysts for desulfurization of gasoline.